AVIP-AM-150-DAN

This product is designed as a two-channel amplifier using class D amplifier technology. It can be used for powering low impedance (4Ω/8Ω) stereo systems with a maximum power of 2 x 75 Watt, while bridging to a constant voltage (100V and 70V) is possible with a maximum output power of 150 Watt. It features Dante 2CH digital inputs and outputs, and balanced or unbalanced line level analog inputs and outputs.

Home Shop Audio AVIP-AM-150-DAN

AVIP-AM-150-DAN

$0.00

150W Amplifier

image

Clear

ติดต่อเรา

ดาวน์โหลด

This amplifier can be controlled via RS-232, LAN and Web GUI. It also features built-in DSP, auto-standby and maximum durability. It is suitable for a vast range of AV installations.

Feature :

Dante 2CH digital audio, balanced or unbalanced line level analog inputs
Dante 2CH digital audio, balanced or unbalanced line level analog and AMP outputs
Built-in audio DSP processor
Switching between Lo-Z and Hi-Z can be achieved to adapt to various types of speaker installation.
- In Lo-Z output mode, single-channel 150 Watt or two-channel 2 x 75 Watt 4Ω/8Ω can be selected
- In Hi-Z output mode, single-channel 150 Watt with 70V/100V can be selected.
Independent input gain, output EQ and volume control
48KHz sampling rate, 24bit independent A/D and D/A converters
5-12V trigger input
Auto standby
Flexible control via RS-232, LAN and Web GUI
Half rack design/one rack design

image	AVIP-AM-150-DAN Image1, AVIP-AM-150-DAN Image2, AVIP-AM-150-DAN Image3, AVIP-AM-150-DAN Image4, AVIP-AM-150-DAN Image5, AVIP-AM-150-DAN Image6

Specifications

Technical
Input	1x Dante Network audio input
Input	1x LINE balanced stereo 0dBu/10kΩ input
Output	1x Dante Network audio output
	1x Stereo or constant voltage 70V/100V speaker output
	1x LINE balanced stereo output
Input Sensitivity	Full power@0.775V (0dBu)
Output Power	DC power supply: 2x 75W@4Ω/8Ω; 1x 150W@8Ω; 1x 150W@70V/100V
Maximum Voltage Gain	27 – 30dB SE/39 – 42dB BTL
Amplifier Type	Class D
Frequency Response	20Hz – 20kHz @ ±3dB
Signal to Noise Ratio	87dB, 20Hz – 10kHz
THD+N	THD+N (1KHz@1W) 0.04%
Control	RS-232, Web GUI
Audio Format	LINE IN [Analog audio, Balanced 2CH, Max input level 2VRMS]
	LINE OUT [Analog audio, Balanced 2CH, Max output level 2VRMS]
	DANTE [Digital audio 2×2 in/out, PCM 2CH 44.1K-96KHz 16/24Bit]
	AMP OUT [Analog audio, Balanced 2CH, Max output level 24.5VRMS]
	70V/100V AMP OUT [Analog audio, Unbalanced 1CH, Max output level 70V/100VRMS]
ESD Protection	Human-body Model: ±8kV (Air-gap discharge) , ±4kV (Contact discharge)
Connections
Input	1x LINE IN [5pin-3.81mm Phoenix Connector]
Input	1x DANTE [RJ45 connector]
Output	1x LINE OUT [5pin-3.81mm Phoenix Connector]
	1x 4/8Ω AMP OUT [MSTB 2.5-GF-5.08, 4-pin locking phoenix, 5.08mm]
	1x 70V/100V AMP OUT [MSTB 2.5-GF-5.08, 4-pin locking phoenix, 5.08mm]
Control	1x RS-232/TRG [5pin-3.81mm phoenix connector] [TRG: 5-12V trigger input to turn on/off the amplifier]
Control	1x LAN [RJ45 connector]
Mechanical
Housing	Front panel: Aluminum; Rear case: Metal Enclosure
Color	Black
Dimensions	240mm [W]×210mm [D]×44mm [H]
Weight	1.88Kg
Power Supply	DC Input: AC100 – 240V 50/60Hz
Power Consumption	240W (Max)
Operating Temperature	0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature	-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity	20%~90% RH (non-condensing)

Reviews

There are no reviews yet.

Be the first to review “AVIP-AM-150-DAN” Cancel reply

This amplifier can be controlled via RS-232, LAN and Web GUI. It also features built-in DSP, auto-standby and maximum durability. It is suitable for a vast range of AV installations.

Feature :

Dante 2CH digital audio, balanced or unbalanced line level analog inputs
Dante 2CH digital audio, balanced or unbalanced line level analog and AMP outputs
Built-in audio DSP processor
Switching between Lo-Z and Hi-Z can be achieved to adapt to various types of speaker installation.
- In Lo-Z output mode, single-channel 150 Watt or two-channel 2 x 75 Watt 4Ω/8Ω can be selected
- In Hi-Z output mode, single-channel 150 Watt with 70V/100V can be selected.
Independent input gain, output EQ and volume control
48KHz sampling rate, 24bit independent A/D and D/A converters
5-12V trigger input
Auto standby
Flexible control via RS-232, LAN and Web GUI
Half rack design/one rack design

image	AVIP-AM-150-DAN Image1, AVIP-AM-150-DAN Image2, AVIP-AM-150-DAN Image3, AVIP-AM-150-DAN Image4, AVIP-AM-150-DAN Image5, AVIP-AM-150-DAN Image6

Specifications

Technical
Input	1x Dante Network audio input
Input	1x LINE balanced stereo 0dBu/10kΩ input
Output	1x Dante Network audio output
	1x Stereo or constant voltage 70V/100V speaker output
	1x LINE balanced stereo output
Input Sensitivity	Full power@0.775V (0dBu)
Output Power	DC power supply: 2x 75W@4Ω/8Ω; 1x 150W@8Ω; 1x 150W@70V/100V
Maximum Voltage Gain	27 – 30dB SE/39 – 42dB BTL
Amplifier Type	Class D
Frequency Response	20Hz – 20kHz @ ±3dB
Signal to Noise Ratio	87dB, 20Hz – 10kHz
THD+N	THD+N (1KHz@1W) 0.04%
Control	RS-232, Web GUI
Audio Format	LINE IN [Analog audio, Balanced 2CH, Max input level 2VRMS]
	LINE OUT [Analog audio, Balanced 2CH, Max output level 2VRMS]
	DANTE [Digital audio 2×2 in/out, PCM 2CH 44.1K-96KHz 16/24Bit]
	AMP OUT [Analog audio, Balanced 2CH, Max output level 24.5VRMS]
	70V/100V AMP OUT [Analog audio, Unbalanced 1CH, Max output level 70V/100VRMS]
ESD Protection	Human-body Model: ±8kV (Air-gap discharge) , ±4kV (Contact discharge)
Connections
Input	1x LINE IN [5pin-3.81mm Phoenix Connector]
Input	1x DANTE [RJ45 connector]
Output	1x LINE OUT [5pin-3.81mm Phoenix Connector]
	1x 4/8Ω AMP OUT [MSTB 2.5-GF-5.08, 4-pin locking phoenix, 5.08mm]
	1x 70V/100V AMP OUT [MSTB 2.5-GF-5.08, 4-pin locking phoenix, 5.08mm]
Control	1x RS-232/TRG [5pin-3.81mm phoenix connector] [TRG: 5-12V trigger input to turn on/off the amplifier]
Control	1x LAN [RJ45 connector]
Mechanical
Housing	Front panel: Aluminum; Rear case: Metal Enclosure
Color	Black
Dimensions	240mm [W]×210mm [D]×44mm [H]
Weight	1.88Kg
Power Supply	DC Input: AC100 – 240V 50/60Hz
Power Consumption	240W (Max)
Operating Temperature	0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature	-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity	20%~90% RH (non-condensing)